防篡改微处理器
在 I 类微处理器基础上具备防篡改能力，并达到 AVA_VAN 2 或 3 级保护。
类别解释
Tamper-resistant microprocessors
此类产品是本条例附件一“Class I”表第 13 项所述具有安全相关功能的微处理器，具有篡改迹象检测、抗篡改或篡改响应等能力，并且在设计上还能够提供《通用准则》和《通用评估方法》所规定的 AVA_VAN 2 级或 3 级保护。
English
These products are the microprocessors with security-related functionalities referred to in point 13 of the Class I table of Annex I, including tamper evidence, resistance or response, and are additionally designed to provide protection of AVA_VAN level 2 or 3 as set out in the Common Criteria and the Common Evaluation Methodology.
CRA 附件三 II 类，技术描述见实施条例 (EU) 2025/2392 附件一第 1–4 项（Class II 表）
Class II of Annex III to the CRA, with technical descriptions in the Class II table of Annex I to Implementing Regulation (EU) 2025/2392
必须采用模块 B+C 或模块 H，由公告机构对产品设计或质量体系开展第三方合格评定。
Module B+C or Module H is mandatory, with a notified body assessing the product design or the quality management system.
重要产品 · II 类的主要义务
满足该类别的更高安全强度要求，产品设计需经公告机构审查。
取得欧盟型式检验证书（模块 B+C）或经质量体系评估（模块 H）后方可加贴 CE 标识。
重大修改须重新评估，并按要求接受公告机构的定期审核。
English
- Meet the higher security level of the category; the design is assessed by a notified body.
- Affix the CE marking only after an EU-type examination certificate (Module B+C) or quality system assessment (Module H).
- Substantial modifications require re-assessment, and periodic audits by the notified body apply.